The Generator Replacement Ripple: Updating MEP Drawings When Emergency Power Changes
AutoMEP Team,
A generator replacement is never a one sheet edit. When emergency power equipment changes, the electrical feeders, transfer switch, fuel and exhaust routing, pad and clearance details, panel schedules, and one line diagram all have to move together, and missing any one of them creates a review comment or a field problem. The reliable approach is to inventory every sheet the new generator touches, update the set in a fixed order, and run a final cross check before issue.
Generator work also sits at the junction of 3 trades at once: electrical owns distribution, mechanical owns exhaust and cooling air, and plumbing often owns fuel piping. If each discipline edits only its own sheets, the connections between sheets quietly disagree.
What changes on MEP drawings when a generator is replaced?
Start with the equipment data, because every downstream edit depends on it. Record the new rating in kW and kVA, voltage and phase, fuel type, tank arrangement, exhaust size, cooling needs, weight, and footprint. A change from diesel to natural gas, for example, removes a day tank detail and adds a gas run and regulator. A larger footprint can push the pad, bollards, and clearances, which then affects the site plan.
From that data sheet, build a touch list before anyone edits. A typical replacement touches 6 places in most sets: the site plan, the generator plan and details, the electrical one line, feeder and conduit schedules, panel schedules with revised emergency loads, and the mechanical sheets covering exhaust, combustion air, and fuel. List each sheet, name an owner, and note what changes on it. That list becomes the checklist for the final review, so nothing relies on memory.
How should you update the electrical drawings first?
Electrical usually carries the highest risk, so update it first. Confirm the transfer switch rating and whether it is service entrance rated, then revise feeder sizes and conduit runs between the generator, the switch, and the distribution it serves. If the new unit has a different output breaker or fault contribution, the one line and coordination notes may need attention from the engineer of record.
Next, rebuild the emergency load picture. Panel schedules carrying life safety, legally required standby, and optional standby loads need to reflect the new capacity, and the load separation code review expects has to stay clear. Flag any mismatch for engineering review rather than drafting around it, because sizing and branch separation are licensed design decisions, not drafting cleanup.
What about fuel, exhaust, and ventilation updates?
Mechanical and plumbing edits follow the equipment data. Exhaust routing changes with outlet size and location, so termination, insulation, and support details need to match the new run. Combustion air and ventilation change with heat rejection, so louver sizes and duct paths should be checked against manufacturer requirements rather than copied from the old installation.
Fuel is the most commonly missed item. A diesel swap can change the day tank, fill and vent lines, and the fuel piping diagram. A gas swap changes piping size, pressure, regulator location, and shutoff details. Put the fuel diagram on the touch list as its own line item, because reviewers ask for it by name.
How can I route the drawing updates faster without losing track?
The drafting work is repetitive: the same rating, model, and feeder data has to land on the plan, one line, schedules, and details, sheet after sheet. That is where errors creep in, because a person updating the fifth sheet from memory will eventually type the old value. Working from the touch list keeps the edits consistent.
This is the kind of multi sheet update firms hand to AutoMEP. You upload a DWG from AutoCAD 2007 and later, or a Revit 2024, 2026, or 2027 file, describe the edit in plain English, and get back a native file that opens in AutoCAD or Revit. AutoMEP reads and indexes the full drawing, writes an operations plan, makes the edit through Autodesk Platform Services, and runs a self review pass. It needs no install, no plugins, and no macros, and new geometry lands on AIA and NCS layers automatically, or on your office CAD standard layers when the project uses them. A licensed professional still reviews the edited drawing before anyone builds from it.
What should a final cross check include before issue?
Review against the touch list, not from memory. Check that the generator tag and rating read the same on the plan, one line, schedules, and details, that feeder callouts match the conduit schedule, and that exhaust and fuel sizes match the equipment data. Confirm clearances and the pad against the new footprint, and confirm demolition notes remove the old unit and lines that no longer exist.
Close with the paperwork reviewers see first. Update the revision table and title block, cloud the changed areas, and add delta triangles. If your office uploads its own title blocks, AutoMEP can apply them to new sheets without changing existing sheets. Then log the change, with the submittal it came from, so the next addendum starts from a clean record.
Frequently asked questions
How much does AutoMEP cost per month?
AutoMEP has 3 plans: Starter at $39 per month, Pro at $99 per month with 3X limits and job chaining, and Team at $249 per month with 20X limits. Every plan starts with a 7 day free trial, with no credit card until checkout, and failed or no change jobs are not counted. Extra jobs are billed by usage on your next invoice, with a fixed monthly cap.
Does a generator swap always need new panel schedules?
Not always, but check them every time. If the new unit changes capacity, branch allocation, or the transfer switch, the affected schedules and the one line need to agree, and showing an unchanged schedule next to a changed one line is a common source of review comments.
Can AutoMEP edit both AutoCAD and Revit generator drawings?
Yes. AutoMEP works on AutoCAD DWG files and Revit RVT files, covering HVAC, electrical, and plumbing edits, and returns a native file in the same format. It does not do clash detection or coordination checks between trades, so your own coordination review still applies before issue.