Skip to content

How do I write a good request for a fire alarm or sprinkler layout?

List the rooms, the device for each, and anything to keep clear of. Here's a request that does all three:

"Add a ceiling smoke detector inside each of these rooms: the Trash Room, the Storage Room, Retail and Reception. Don't put smoke detectors in either shower room. In the Laundry Room, add a heat detector instead. Keep every device clear of the air outlets, and add a legend below the plan."

Detectors: ceiling devices go in the middle of each room you name. AutoMEP keeps smoke detectors out of showers, baths, toilets and saunas even when you say "every room", because steam sets them off, and the note says which rooms it left out. Say what to keep clear of, such as diffusers, and how far.

Wall devices: pull stations and other wall-mounted devices go against a wall. Say where, for example "a pull station beside each exit door".

Your own symbols: if your drawing already has detector or device blocks, AutoMEP uses them and names them at the top of the note. If it has none, it draws a simple labeled symbol on a fire alarm layer and says so.

Sprinklers: say where the heads go and how they're spaced, for example "sprinkler heads in a grid at 10 foot spacing in the Warehouse, with branch lines to the main". Heads and sprinkler pipe go on their own layers, and pipe is routed around walls. AutoMEP draws the layout you describe. It doesn't check coverage against the sprinkler standard or run hydraulic calculations.

Legend: ask for one below the plan, and AutoMEP draws each symbol beside its line.

Before anyone builds from it: a fire alarm or sprinkler layout needs review by a qualified fire protection designer, like every AutoMEP result. More in what AutoMEP can't do yet.

More in MEP Operations

Did this answer your question? If not, contact support and send us the drawing.